Ag-Chem RG700B Applicator Chassis (Tier IV Engine) Operators Manual

Table of Contents:

• 1. Safety
• 1.1 A word to the operator
• 1.1.1 Safety symbol
• 1.1.2 Safety messages
• 1.1.3 Information messages
• 1.1.4 Follow safety instructions
• 1.1.5 Prepare for emergencies
• 1.2 Operate the machine
• 1.2.1 Prevent machine runaway
• 1.2.2 Use correct lamps and markers
• 1.2.3 Operation on slopes
• 1.2.4 Traveling on public roads
• 1.2.5 Stopping and parking
• 1.2.6 System boom operation
• 1.2.7 Exhaust fumes
• 1.2.8 Noise prevention
• 1.2.9 Handle fuel correctly
• 1.2.10 Towing
• 1.3 Maintenance and service
• 1.3.1 Modifications
• 1.3.2 Practice correct maintenance
• 1.3.3 Chemical safety
• 1.3.4 Work in a clean area
• 1.3.5 Understand correct service
• 1.3.6 Use correct tools
• 1.3.7 Support machine correctly
• 1.3.8 Service cooling system correctly
• 1.3.9 Remove paint before welding or heating
• 1.3.10 Tires and wheels
• 1.3.11 Mobile radio installations
• 1.3.12 Fire prevention
• 1.4 North American safety signs
• 1.4.1 Safety signs
• 1.4.2 North American chassis safety signs
• 1.4.3 North American engine safety signs
• 1.4.4 North American hydraulic safety signs
• 1.4.5 North American electrical safety signs
• 1.4.6 North American cab safety signs
• 1.5 International safety signs
• 1.5.1 Safety signs
• 1.5.2 International chassis safety signs
• 1.5.3 International engine safety signs
• 1.5.4 International hydraulic safety signs
• 1.5.5 International electrical safety signs
• 1.5.6 International cab safety signs
• 2. Introduction
• 2.1 Operator Manual
• 2.2 Serial number identification
• 2.2.1 Serial number definition
• 2.3 Break-in period
• 2.3.1 Hydraulic system
• 2.3.2 Coolant level
• 2.3.3 Wheel drive gearboxes
• 2.3.4 Tightening the wheel mounting nuts
• 2.3.5 Torque rod
• 2.3.6 Batteries
• 2.3.7 Axle shims
• 2.3.8 Engine belts
• 2.3.9 Fuel filter and fuel pre-filter
• 2.3.10 Chassis and cab modification
• 2.4 Hydraulic introduction
• 2.4.1 Hydrostatic drive
• 2.4.2 Drive lever and pump and drive motors
• 2.4.3 Engine
• 2.4.4 Charge pump
• 2.4.5 Hydraulic oil cooler
• 2.4.6 Reservoir and filters
• 2.5 Component locations
• 2.5.1 Hydraulic component position
• 2.6 Fuse and relay
• 2.6.1 Cab rear terminal mini fuse relay access door
• 2.6.2 Cab rear terminal mini fuse relay panel
• 2.6.3 Chassis rear terminal mini fuse relay location
• 2.6.4 Chassis rear terminal mini fuse relay (RTMR) panel
• 2.6.5 Additional power sources
• 2.7 Usage and disposal
• 2.7.1 Intended use
• 2.7.2 Proper disposal of waste
• 2.8 Pre-delivery checklist
• 2.9 Emissions warranty – Tier IV final
• 2.9.1 United States and Canada emission control warranty statement
• 2.9.2 California emission control warranty statement
• 3. Operation
• 3.1 Instruments and controls
• 3.1.1 Dash panel
• 3.1.2 Drive lever
• 3.1.3 Throttle pedal
• 3.1.4 Automatic park brake
• 3.1.5 Armrest switches
• 3.1.6 Selecting keypad controls
• 3.1.7 Mirrors
• 3.1.8 Map and dome light
• 3.1.9 Radio (if equipped)
• 3.1.10 Sun Visor
• 3.1.11 Cup holder
• 3.1.12 Power port (if equipped)
• 3.1.13 Power outlet station
• 3.1.14 Cargo net
• 3.1.15 Brake pedal
• 3.1.16 Steering wheel
• 3.1.17 Multifunction lever
• 3.1.18 Ignition switch
• 3.1.19 Roof switches
• 3.2 Engine operation with no load or low load
• 3.3 Temperature control
• 3.3.1 Heater operation
• 3.3.2 Defrosting or defogging operation
• 3.3.3 Air conditioner operation
• 3.3.4 Automatic fan speed control
• 3.3.5 Manual fan speed control
• 3.3.6 Cab air temperature sensor
• 3.3.7 Heating and cooling troubleshooting
• 3.3.8 Pressurizer blower
• 3.3.9 Air vents
• 3.4 Operator seat
• 3.4.1 Standard operator seat
• 3.4.2 Deluxe seat
• 3.4.3 Deluxe heated/vented seat
• 3.4.4 Seat belts
• 3.5 Driving the machine
• 3.5.1 Battery disconnect switch
• 3.5.2 Checklist before starting engine
• 3.5.3 Starting the machine
• 3.5.4 Starting the machine in cold temperatures
• 3.5.5 Cold start option
• 3.5.6 Driving the machine
• 3.5.7 Restarting a stalled engine
• 3.5.8 Grid air heater symbol
• 3.5.9 Diesel exhaust fluid (DEF) cold start
• 3.5.10 Engine power limitations
• 3.5.11 Low diesel exhaust fluid (DEF)/Adblue® level
• 3.5.12 Low DEF level symbol
• 3.5.13 SCR system malfunction
• 3.5.14 Stopping the engine
• 3.5.15 Backup alarm
• 3.6 Machine braking
• 3.6.1 Park brake switch
• 3.7 Adjusting the track width
• 3.7.1 Adjusting the track width hydraulically
• 3.7.2 Adjusting the track width manually
• 3.8 Using the shuttle shift
• 3.8.1 Field mode shuttle shifting
• 3.8.2 Road mode shuttle shifting
• 3.9 Machine management center display
• 3.9.1 Home screen display
• 3.9.2 System configuration
• 3.9.3 Machine persistent area
• 3.9.4 Changing measuring units
• 3.9.5 Viewing screen
• 3.9.6 Information
• 3.9.7 Engine
• 3.9.8 Transmission
• 3.9.9 Fuel
• 3.9.10 Settings
• 3.9.11 Active error codes diagnostics
• 3.9.12 Stored error codes
• 3.9.13 Foam marker
• 3.9.14 Speed source
• 3.9.15 Service
• 3.10 Drive train management
• 3.11 Gator crawl
• 3.12 Traveling on public roads
• 3.13 Trailering the machine
• 3.13.1 Loading the machine
• 3.13.2 Unloading the machine
• 3.13.3 Tow override procedure
• 3.13.4 Manually releasing the park brake override
• 3.14 Air dump valve
• 4. Maintenance
• 4.1 Maintenance introduction
• 4.1.1 Lubricants and fluids
• 4.1.2 Lubricant filling reminders
• 4.2 Maintenance schedule
• 4.3 Exhaust system
• 4.3.1 Exhaust system temperature
• 4.4 Fuel system
• 4.4.1 Fuel tank
• 4.4.2 Fuel water separators and primary fuel filter
• 4.4.3 Changing the primary fuel filter
• 4.4.4 Changing the fuel water separator element
• 4.4.5 Priming the fuel system
• 4.4.6 Draining the fuel water separator
• 4.4.7 Fuel storage
• 4.4.8 Diesel exhaust fluid (DEF) storage
• 4.5 Selective catalytic reduction (SCR) System
• 4.5.1 Diesel exhaust fluid tank
• 4.5.2 Diesel exhaust fluid (DEF) storage
• 4.5.3 SCR system overview
• 4.5.4 SCR system components and their functions
• 4.5.5 SCR system maintenance
• 4.5.6 Replace the main filter and the inlet filter of the supply module
• 4.5.7 SCR system technical data
• 4.6 Axle
• 4.6.1 Checking the front and the rear wear pad adjusters
• 4.6.2 Axle shimming
• 4.6.3 Track wheel legs
• 4.6.4 Wheel drive gearbox
• 4.6.5 Gearbox lubrication
• 4.6.6 Gearbox oil level
• 4.6.7 Changing the gearbox oil
• 4.6.8 Wheel drive gearbox mounting bolts
• 4.6.9 Adjusting the two wheel steer toe-in
• 4.6.10 Crop deflector adjustment
• 4.7 Engine
• 4.7.1 Checking the engine coolant level
• 4.7.2 Checking the engine oil level
• 4.7.3 Engine oil and oil filter replacement
• 4.7.4 Engine oil filter
• 4.7.5 Engine belt
• 4.7.6 Compressor belt
• 4.7.7 Removing the air filters
• 4.7.8 Installing the air filters
• 4.8 Cooling package
• 4.9 Hydraulic System
• 4.9.1 Hydraulic component position
• 4.9.2 Changing the hydraulic oil
• 4.9.3 Re-torque bolts for breather cover
• 4.10 Air system
• 4.10.1 Air system service
• 4.11 Tires
• 4.11.1 Tire service
• 4.11.2 Tire rotation
• 4.11.3 Tire safety loads and pressure
• 4.11.4 Maximum tire load for specified speed
• 4.11.5 Determining load per tire
• 4.11.6 Replacing a tire on a rim
• 4.11.7 Wheel removal
• 4.11.8 Wheel installation
• 4.11.9 Tightening the wheel mounting nuts
• 4.12 Cab maintenance
• 4.12.1 Cab air filters
• 4.12.2 Primary fresh air filter
• 4.12.3 Secondary fresh air filter
• 4.12.4 Recirculation air filter
• 4.12.5 Cleaning cab air filter element
• 4.12.6 Primary fresh air filter maintenance
• 4.12.7 Secondary fresh air filter maintenance
• 4.12.8 Recirculation filter maintenance
• 4.12.9 Cab mounting bolts
• 4.12.10 Windscreen wiper blade
• 4.12.11 Windscreen washer reservoir
• 4.13 Chassis
• 4.13.1 Chassis lubrication
• 4.13.2 Torque rods
• 4.14 Electrical system
• 4.14.1 Electrical system safety
• 4.14.2 Replacing fuses
• 4.14.3 Batteries
• 4.14.4 Using a booster battery
• 4.14.5 Battery removal procedure
• 4.14.6 Battery installation procedure
• 4.15 Storing the machine
• 4.16 Operating after storage
• 5. Troubleshooting
• 5.1 Engine Troubleshooting
• 5.2 Fault code reference
• 6. Specifications
• 6.1 Specifications
• 6.1.1 Chassis specifications
• 6.1.2 Dimensions
• 7. Accessories
• 7.1 Belly pans – if equipped
• 7.1.1 Opening the belly pans – if equipped
• 7.1.2 Closing the belly pans – if equipped
• 7.2 Crop shields – if equipped
• 7.2.1 Removing a crop shield – if equipped
• 7.2.2 Installing a crop shield – if equipped