BT CBE 1.2F, CBE 1.5F, CBE 1.6F, CBE 1.6FL E Series Forklift Manual

ForkLift Model: CBE 1.2F, CBE 1.5F, CBE 1.6F, CBE 1.6FL
Publication 036-0410-06
English 2004
Format: PDF

BT CBE 1.2F, CBE 1.5F, CBE 1.6F, CBE 1.6FL E Series Forklift Service Manual: 194 Pages & 104 Pages
Parts Manual: 1682 Pages

Forklift Manual Table of Content:

• OPERATOR’S SEAT
• HYDRAULIC
• TRANSMISSION GEAR & WHEELS
• BRAKE SECTION
• MAST GROUP
• ELECTRIC & ELECTRONIC
• CONSOLE FUNCTION / GENERAL DESCRIPTION
• MAPS FOR USING THE CONSOLE
• WIRING DIAGRAM
• MAINTENANCE TABLE
• SAFETY INFORMATION

These service instructions cover descriptions for dismantling and assembling the gear, filling/changing the oil and measures in the event of leakage. Complete overhaul of the gear is such an extensive piece of work that it should be carried out in a workshop by specially trained personnel.

1) Battery status indicator
2) Parking brake ON warning light
3) Brake fluid low level warning light
4) Lifting speed reduction due to flat battery
5) “Dead man device” warning light
6) Drive left motor temperature warning light
7) Drive right motor temperature warning light
8) Lifting motor temperature warning light
9) Electronic hour meter
10) Diagnostic code display (see Alarm function chapter).
11) Selected setting display: L (low), P (programmable), H (high)
12) Low speed light (when the reduction speed is selected the blue
light is on)
13) Forward/backwardindication
14) Steeringindication
15) Light sensor

HYDRAULIC OIL REPLACING
The tank does not have the drain plug. Two different procedures can be used to replace the hydraulic oil:
1) To discharge the hydraulic oil it is possible to use a pump connected to the hole for the oil level rod (point A).
2) It is possible olso to disconnect the drain hose of the control valve from the tank and put it on a external case.
By pressing the brake pedal (corrispond to the minimum RpM of the lifting pump) the oil flow out.
Pay attention that the pump must not work without oil.