BT CBE 1.8F, CBE 1.8FL, CBE 2.0F E Series Forklift Manual

ForkLift Model: CBE 1.8F, CBE 1.8FL, CBE 2.0F
Publication 036-0410-06
English 2004
Format: PDF

BT CBE 1.8F, CBE 1.8FL, CBE 2.0F E Series Forklift Service Manual: 194 Pages & 104 Pages
Parts Manual: 1426 Pages

Forklift Manual Table of Content:

• OPERATOR’S SEAT
• HYDRAULIC
• TRANSMISSION GEAR & WHEELS
• BRAKE SECTION
• MAST GROUP
• ELECTRIC & ELECTRONIC
• CONSOLE FUNCTION / GENERAL DESCRIPTION
• MAPS FOR USING THE CONSOLE
• WIRING DIAGRAM
• MAINTENANCE TABLE
• SAFETY INFORMATION

These service instructions cover descriptions for dismantling and assembling the gear, filling/changing the oil and measures in the event of leakage. Complete overhaul of the gear is such an extensive piece of work that it should be carried out in a workshop by specially trained personnel.

STEERING CONTROL
The steering uses the same oil as the lifting by means of a priority valve, which guarantees a sufficient oil flow to the power steering.
The oil capacity is checked by the Ls signal (load – sensing) coming from the steering unit so that the oil capacity sent to the power steering is equal to its actual request.

The exceeding oil is sent to the control valve for other functions.
When the steering wheel is turned the steering unit “measures” a volume of oil proportional to the above rotation and sends it into the steering cylinder.

Every 250 hours
– check the entire system to identify any leak; any intervention must be carried out without pressure in the system.
Every 4 000 working hours
– replace hoses (G) connecting the orbitrol device to the steering jack.
Every 10 000 hours
– replace the hydraulic pipe system.
Power steering pressure setting
The max power steering pressure must be 90 Bar