Table of Contents
General
Engines
Fuel System
Electrical
Track and Suspension
Power Train
Brakes
Hydraulics
Mounted Equipment
Manual Extract:
Before performing any service work on the machine, the following steps must be carried out in the order shown :
– Park the machine on hard, flat ground.
– Lower the attachment to the ground.
– Stop the engine.
– Turn the battery master switch to the “OFF” position and remove the key.
– Simultaneously operate the emergency foot pump and the control lever so as to release the pressure in the
hydraulic system.
– Unscrew the hydraulic reservoir compression release cap two or three turns, then tighten the cap.


Reviews
There are no reviews yet.