Case 9310, 9330 Tractor Service Manual

Table of Content (Service Manual)

1. General
2. Engine
3. Fuel System
4. Electrical
5. Steering
6. Power Train
7. Brakes
8. Hydraulics System
9. Chassis

Manual Extract: Error Code E40

Indicates a mode lever shuttle-shift (forward to reverse or reverse to forward) was attempted at speeds greater than safety possible (2 mph or above – a speed great enough to cause a ground speed matching routine to any gear above 1st). The audio alarm tone will sound continuously. The transmission goes into a controller AUTHORIZED “Electrical Neutral”. Commands from the mode lever, pulsar lever, and the top of travel clutch pedal switch ground speed matching are disabled. To eliminate error and alarm, shift the mode lever into neutral, then shift into forward or reverse below 2 mph. If the digital information in the MPH or RPM LCD displays is wrong, check the wiring harness and/or connector at each respective engine RPM sender of transmission MPH sender.