Case CX15B, CX18B Series 2 Mini Excavator Service Manual

Table of Contents

1. Content
2. Introduction
3. Engine
4. Hydraulics System
5. Frames and Ballasting
6. Tracks and Track Suspension
7. Electrical System
8. Booms, dippers and buckets
9. Dozer Blade and Arm
10. Platform, cab, bodywork and decals

Manual Extract: Cylinder head – Assemble

Installation of cylinder head gasket

NOTE: Do not use liquid gasket.
1. Make sure that there is no dirt or dents on the top surfaces of the cylinder block and pistons.
2. Screw in two guide bolts  in the bolt holes of the block.
3. Place the new cylinder head gasket on the cylinder block using the guide bolts as a guide.

NOTE: The model name is stamped on the front top face of the gasket so that it is not confused with one for other model.
Installation of cylinder head assembly Install the cylinder head by means of the guide screws