Case CX210C Crawler Excavator Service Manual

Table of Content (Service Manual)

1. Content
2. Introduction
3. Engine
4. Hydraulics System
5. Frames and Ballasting
6. Tracks and Track Suspension
7. Cab Climate Control
8. Electrical System
9. Booms, dippers and buckets
10. Dozer Blade and Arm
11. Platform, cab, bodywork and decals
12. Special Tools Index
13. Hydraulic Schematics
14. Electrical Schematics

Manual Extract: Hammer electric system – Dynamic description Crusher mode Purpose

It is possible to set the maximum flow and the maximum pressure for each of the five crushers.
Operation explanation
1. Each time the attachment select switch is pressed, it switches between Normal Mode → Breaker Mode → Crusher Mode → Normal Mode.
The maximum flow for the switched mode is displayed on the monitor for 3 s.
–  The crusher mode only has Crusher Mode 1 in the initial state, but a mode can be added on the flow setting screen.

2. Crusher can be used by selecting crusher mode.
– Set the maximum flow and maximum pressure first on the flow setting screen.
– If the set flow rate requires 2 pumps flow, 2 pumps flow is performed.

3. When the key is turned “OFF” once, then “ON” again, the attachment mode selected previously is retained.