Case CX700B Crawler Excavator Service Manual

Table of Contents

1. General Information
2. Engine
3. Fuel System
4. Frames and ballasting
5. Electrical systems
6. Undercarriage
7. Drive Train
8. Upper structure Hydraulics
9. Upper structure

Manual Extract: REMOVAL OF TAKE-UP ROLLER

1 Removal of take-up roller
[1] Remove the shoe assembly.
See the “Removal and Installation of Shoe Assembly” procedure.

[2] Use a crowbar (3) to pull off the take-up roller (1) from the side frame (2).

[3] Install the lifting equipment (4) on the take-up roller (1) and hang it from the side frame (2) with the crane.

[4] Place the take-up roller (1) onto wood planks (6) as in the diagram. Use a wrench to remove the bolt (5) and separate the take-up roller and the grease cylinder (4).