Case Farmall 50A, 60A, 70A Tractor Service Manual

Table of Contents

1. Introduction
2. Engine
3. Clutch
4. Transmission
5. Four Wheel Drive
6. Front Axle
7. Rear Axle
8. Power Take Off
9. Brake and Controls
10. Hydraulic Systems
11. Steering
12. Wheels
13. Electrical System
14. Platform, cab, bodywork and decals
15. Special Tools

Manual Extract: Mechanical transmission external controls – Adjust

Shuttle interlock cable
1. Measure dimension (A) at cable end as shown in figure 1. (Top of nut to bottom of threads). The desired length of (A) is approximately 26.000 mm (1.024 in), adjust if required.

2. At the opposite cable end, count the number of visible threads (B), there should be 6 or 7. Thread length can be changed by adjusting the nuts on either side of cable mounting bracket (C).
3. Adjust the nuts so that the shuttle lever starts to move when clutch pedal is depressed beyond free play 50.00 – 55.00 mm (1.97 – 2.17 in) from rest) and then tighten.