Cub Cadet 1000 and 1500 Series Service Manual

The manual is applicable for the following Cub Cadet 1000 and 1500 Series Tractor:

The manual is in PDF Format
Language: English
Type: Cub Cadet 1000 Series and 1500 Series Tractor Service Manual 94 Pages
Provide specific service and repair procedures for a range of Cub Cadet 1000 and 1500 Series tractors manufactured for the 2005/2006 season.

If not present in the table of content details service information about the engine will be provided by the engine manufacturer in most cases.

The Cub Cadet 1000 and 1500 Series tractors manual instruction are for use by trained technicians who are experienced in the service and repair of outdoor power equipment of the kind described in this publication 769-02100.

These materials are intended to provide supplemental information to assist the trained technician, untrained or inexperienced individuals. Read, understand, and follow all instructions and use common sense when working on power equipment. This includes the contents of the products Operators Manual, supplied with the equipment.

The Cub Cadet Tractor Service Manual Content

1. INTRODUCTION …………………………………………………………………………………………………………1
2. NEW HOOD DESIGN …………………………………………………………………………………………………..3
3. HOOD PANEL REMOVAL: 1500 SERIES ……………………………………………………………………..5
4. HOOD AND HINGE REMOVAL: 1500 SERIES ………………………………………………………………6
5. REAR FENDER REMOVAL ………………………………………………………………………………………….7
6. FUEL SYSTEM ……………………………………………………………………………………………………………9
7. FUEL SHUT-OFF SOLENOID ……………………………………………………………………………………. 11
8. FUEL RELATED NO-START ISSUES …………………………………………………………………………. 11
9. MUFFLER REMOVAL ……………………………………………………………………………………………….. 12
10. CUTTING DECK REMOVAL ………………………………………………………………………………………. 13
11. DECK LIFT SHAFT ASSEMBLY ………………………………………………………………………………… 15
12. LIFT SHAFT BUSHINGS …………………………………………………………………………………………… 16
13. DECK LIFT CABLES AND PULLEYS …………………………………………………………………………. 17
14. LEVELING THE CUTTING DECK ………………………………………………………………………………. 18
15. DASH PANEL REMOVAL …………………………………………………………………………………………. 20
16. CRUISE CONTROL AND PARK BRAKE LINKAGES …………………………………………………… 22
17. TRACTION DRIVE BELT REPLACEMENT: CVT …………………………………………………………. 24
18. DRIVE SYSTEM ADJUSTMENT: CVT ………………………………………………………………………… 27
19. BRAKE ADJUSTMENT: CVT …………………………………………………………………………………….. 30
20. SERVICING THE BRAKE PEDAL SHAFT BUSHINGS: ………………………………………………… 32
21. TRANSAXLE REPLACEMENT: CVT ………………………………………………………………………….. 34
22. TRANSAXLE SERVICE AND INTERNALS: CVT …………………………………………………………. 36
23. TRACTION DRIVE BELT REPLACEMENT: HYDROSTATIC LT ……………………………………. 36
24. DRIVE SYSTEM ADJUSTMENT: HYDROSTATIC LT ………………………………………………….. 39
25. HYDRO CONTROL ROD ADJUSTMENT ……………………………………………………………………. 42
26. BRAKES AND BRAKE ADJUSTMENT: HYDROSTATIC LT …………………………………………. 43
27. PEDAL BUSHING REPLACEMENT ……………………………………………………………………………. 46
28. TRANSAXLE SERVICE AND MAINTENANCE: HYDROSTATIC LT ……………………………….. 47
29. TRANSAXLE REPLACEMENT: HYDROSTATIC LT …………………………………………………….. 49
30. TRACTION DRIVE BELT REPLACEMENT: HYDROSTATIC GT……………………………………. 52
31. DRIVE SYSTEM ADJUSTMENT: HYDROSTATIC GT…………………………………………………… 54
32. BRAKES AND BRAKE ADJUSTMENT: HYDROSTATIC GT …………………………………………. 58
33. TRANSAXLE SERVICE AND MAINTENANCE: HYDROSTATIC GT ………………………………. 62
34. TRANSAXLE REPLACEMENT: HYDROSTATIC GT …………………………………………………….. 64
35. STEERING GEAR AND STEERING PINION GEAR REPLACEMENT …………………………….. 67
36. STEERING ADJUSTMENT / ALIGNMENT ………………………………………………………………….. 68
37. PIVOT BAR SERVICE ………………………………………………………………………………………………. 69
38. ELECTRICAL SYSTEM …………………………………………………………………………………………….. 71
39. UNDERSTANDING THE PTO SWITCH ……………………………………………………………………….. 77

Some instructions may refer to other parts of the manual for subsidiary procedures. This avoids repeating the same procedure two or three times in the manual.

Intent: This manual is intended to: Provide specific service and repair procedures for the range of Cub Cadet 1000 and 1500 Series tractors manufactured.

This Service Manual is not a substitute for the Operators Manual. You must read, understand and follow all of the directions in this manual as well as the Operators Manual before working on this power equipment.