Kubota BX1800, BX2200 Tractor Workshop Service Manual

Kubota Tractor Model BX1800, BX2200
Publication: 9Y121-12463
Format: PDF
Language: English and French
Kubota BX1800, BX2200 Tractor Workshop Manual – 300 Pages ( English Version)
Kubota BX1800, BX2200 Tractor Workshop Manual – 318 Pages ( French Version)
Operators Manual: 64 Pages

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of KUBOTA Tractors BX1800 and BX2200. It is divided into two parts, Mechanism and Servicing for each section.
• Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
• Servicing the BX1800, BX2200 tractors
Under the heading General section comes general precautions, check and maintenance and special tools. Other section, there are troubleshooting, servicing specification lists, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.

Governor Shaft
1. Remove the pump cover.
2. Remove the external snap ring (1) from the governor shaft (2).
3. Pull out the governor shaft (2).
(When reassembling)
• Make sure assembling the external snap ring of the governor shaft.
• Check the governor shaft for smooth rotation.
• IMPORTANT
• When replacing the ball bearing of governor shaft of the BX1800 and BX2200 tractors, securely fit the ball bearing (3) to the crankcase, apply an adhesive (Three Bond 1324B or equivalent) to the set screw (4), and fasten the screw until its tapered part contacts the circumferential end of the ball bearing.