Kubota BX1870, BX2370, BX2670 Tractor Loader Workshop Manual

Kubota Tractor Model BX1870, BX2370, BX2670
Publication: 9Y121-08554
Format: PDF
Language: English
Kubota BX1870, BX2370, BX2670 Tractor Workshop Manual – 417 Pages

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of KUBOTA Tractor BX1870D, BX2370D, BX2670D, KUBOTA Rotary Mower RCK48-18BX, RCK54-23BX, RCK60B-23BX, RCK48P-18BX, RCK54P-23BX, RCK60D-26BX, RCK54D-26BX and KUBOTA Front Loader LA203A, LA243A. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / tractor mechanism that this workshop manual does not include.
Servicing BX1870, BX2370, BX2670 Tractors
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing

Checking 3-point Hitch Oil Flow
IMPORTANT
• Use the instruction with the flowmeter when you use the flowmeter.
• While testing, do not close the flowmeter loading valve completely.
1. Remove the hydraulic pipe behind the hydraulic cylinder and fix the flow meter hose and the flow (meter) inlet as shown in the photo.
2. Remove the transmission fluid filling plug for the tractors BX1870, BX2370, BX2670, then fix the flow meter hose and the flowmeter (outlet).
3. If the flow volume is insufficient, replace the pump.
4. After measuring the flow volume, remove the flow meter then reassembling the hydraulic pipe to the original position.