Kubota M95X, M105X, M125X Tractor Workshop Service Manual

Kubota Tractor Model M95X, M105X, M125X
Publication: 97897-13270
Format: PDF
Language: English and French
Kubota M95X, M105X, M125X Tractor Workshop Manual – 654 Pages (English Version)
Kubota M95X, M105X, M125X Tractor Workshop Manual – 697 Pages (French Version)

Table of Content of the Workshop Service Manual

This Workshop Manual has been prepared to provide servicing personnel with information on the mechanism, service and maintenance of M95X, M105X and M125X.
It is divided into three parts, General, Mechanism and Servicing.
• General
Information on the tractor identification, the general precautions, maintenance check list, check and maintenance and special tools are described.
• Mechanism
Information on the construction and function are included. This part should be understood before proceeding with troubleshooting, disassembling and servicing.
Refer to Diesel Engine / Tractor Mechanism Workshop Manual (Code No. 9789701872 / 97897-18200) for the one which has not been described to this workshop manual.
• Servicing
Information on the troubleshooting, servicing specification lists, tightening torque, checking and adjusting, disassembling and assembling, and servicing which cover procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on the latest product information available at the time of publication.

Your KUBOTA M95X, M105X, M125X dealer is always ready to help so that your tractor offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in this workshop service manual.

IMPORTANT INSPECTION ITEMS AFTER REASSEMBLING

a Operate the Kubota M95X, M105X, M125X Tractor and check for Unusual Noise and Vibrations.
b Make Sure the Safety decals and Wire harness Clamps are in their Specified Positions.
c With the Machine Front in a Specified Posture, Check the Amount of Hydrauric Oil Checking the oil level (For further details, refer to the Tractor M95X, M105X, M125X Operators Manual)

Execution Condition for Automatic Shifting
The condition to shift automatically is as follows.
1. Power shift is in L or H position, and the neutral switch is not depressed.
2. The throttle control increase or decrease is not being conducted.
3. The clutch pedal is not depressed.
4. The steering wheel is not being operated (turning angle switch is not turned on).
5. The machine is running forward.
• Auto Shift Down Function
Tractor will auto shift down when the following conditions are achieved.
1. The throttle opening of the engine set without load is above 1300 min-1 (rpm).
2. Engine drop is above the preset value.
3. Engine is not on recovering condition.
• Auto Shift Up Function
Tractor will auto shift up when the following conditions are achieved.
1. Throttle set rpm is above 1600 min-1 (rpm).
2. Engine rpm is not increased by pushing outer load.
3. Engine drop speed and range is smaller than preset value.