Kubota RTV-X1100C Utility Vehicle Workshop Service Manual

Kubota Utility Vehicle Model RTV-X1100C
Publication: 9Y111-26250
Format: PDF
Language: English

• Kubota RTV-X1100C Utility Vehicle Workshop Manual – 472 Pages
• Kubota RTV-X1100C Utility Vehicle Operators Manual – 124 Pages

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the RTV-X1100C. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / Utility Vehicle mechanism that this workshop manual does not include.
Servicing RTV-X1100C Utility Vehicle
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing

Your KUBOTA dealer is always ready to help so that your Utility Vehicle offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in RTV-X1100C Utility Vehicle workshop service manual.

Checking VHT Neutral Spring RTV-X1100C Utility Vehicle

1. Park the vehicle on a flat place.
2. Set the parking brake.
3. Shift the range gear shift lever to the NEUTRAL position.
4. Lock the hydraulic lift cylinder lever to the NEUTRAL position with restricting plate.
5. Start the engine.
6. Make sure that the rotation speed of the engine returns to the idling rotation immediately when taking the foot off the pedal, after depressing the speed control pedal several times.
7. If does not operate normally check the linkage. (See page 1-S32.)

Checking VHT Pressure Release
WARNING
To avoid serious injury:
• Do not touch muffler or exhaust pipes while they are hot; severe burns could result.
1. Park the vehicle on a level surface and set the parking brake.
2. Start the engine and shut it off soon.
(a) No clearance between rod and link.
(b) The length of the rod is appeared 21.5 mm (0.85 in.) and