Kubota RTV-X900, RTV-X1120D Utility Vehicle Workshop Service Manual

Kubota Utility Vehicle Model RTV-X900,RTV-X1120D
Publication: 9Y111-26171
Format: PDF
Language: English

• Kubota RTV-X900, RTV-X1120D Utility Vehicle Workshop Service Manual – 488 Pages
• Kubota RTV-X900, RTV-X1120D Utility Vehicle Operators Manual – 114 Pages

Table of Content of the Utility Vehicle RTV-X900,RTV-X1120D Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the RTV-X900, RTV-X1120D. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
-Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specifications
• Dimensions
– General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
– Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870) for the diesel engine that this workshop manual does not include.
– Servicing for RTV-X900, RTV-X1120D
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing All illustrations, photographs and specifications

Checking Radiator Hose, Pipe and Clamp
Park the vehicle on a flat surface. Raise the cargo bed and mount the safety support.
Check to see if radiator hoses are properly fixed every 200 hours of operation or 6 months, whichever comes first.
1. If hose clamps are loose or water leaks, tighten bands securely.
2. Replace hoses and tighten hose clamps securely, if radiator hoses are swollen, hardened or cracked.
Replace hoses and hose clamps every 2 years or earlier if checked and found that hoses are swollen, hardened or cracked.

– Precaution at Overheating
Take the following actions in the event the coolant temperature is close to or more than the boiling point, which is called Overheating.
1. Stop the vehicle operation in a safe place, unload the engine and remain at idle.
2. Don’t stop the engine suddenly, but stop it after about 5 minutes of unloaded idling.
3. Keep yourself well away from the vehicle for at least 10 minutes or while the steam is blowing out.
4. Check to confirm that there is no danger from the overheat condition, check the cause of the overheat and fix the cause.
After the engine has cooled, re-start the engine.