Kubota RTV1140CPX Utility Vehicle Workshop Service Manual

Kubota Utility Vehicle Model RTV1140CPX
Publication: 9Y111-02933
Format: PDF
Language: English

• Kubota RTV1140CPX Utility Vehicle Workshop Manual – 384 Pages
• Kubota RTV1140CPX Utility Vehicle Operators Manual – 104 Pages

Table of Content of the Workshop Service Manual

This Workshop Manual tells the servicing personnel about the mechanism, servicing and maintenance of the RTV1140CPX. It contains 4 parts: “Information”, “General”, “Mechanism” and “Servicing”.
Information
This section primarily contains information below.
• Safety First
• Safety Decal
• Specification
• Dimension
General
This section primarily contains information below.
• Engine Identification
• Model Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue with the subsequent sections, make sure that you read this section.
Refer to the latest version of Workshop Manual (Code No. 9Y021-01870 / 9Y021-18200) for the diesel engine / Utility Vehicle mechanism that this workshop manual does not include.
Servicing RTV1140CPX Utility Vehicle
This section primarily contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing

Your KUBOTA dealer is always ready to help so that your Utility Vehicle offers the best performance. After having carefully read this manual, you will realize that much of the routine maintenance can be done by yourself. Machines must be disassembled and assembled efficiently and safely. It is very important to thoroughly understand the construction and function of the machine, to make all appropriate preparations, and start operations according to the specified working procedures in RTV1140CPX Utility Vehicle workshop service manual.

The hex. socket plug is securely tightened. Therefore, it is very important to use a proper-sized allen wrench and fit it securely onto the plug. Do not give a shock but put your weight on the plug slowly, paying attention not to damage its hex. socket section. If the allen wrench is fitted on the plug at a slant or an improper-sized allen wrench is used to loose the plug, the hex. socket section will be damaged and you won’t be able to loose the plug.
2. Install the HST adaptor and high pressure gauge to P1 port (2).
3. Check to see that parking brake is applied.
4. Disconnect the unload cable (1) from brake pedal side.
5. Set the 4WD lever to 2WD position.
6. Start the engine.
7. Place the range gear shift lever in H position.
8. Depress the speed control pedal, and measure the check and high pressure relief valve pressure. (Engine speed is set by using the tachometer.)
9. If the measurement is not within the operating pressure, replace the check and high pressure relief valve assembly with new one. (See page 2-S37.).