Massey Ferguson Z29, Z33 Mower Manual

Model: Mower Z29, Z33
Format: PDF
Language: English
Type: Workshop Service Manual
Publication No: 4283357M1

Massey Ferguson Z29, Z33 Mower Workshop Manual – 220 Pages

Manual Table of Content 

INTRODUCTION……………………………………………………………………………………………………………………………………………..01
GENERAL INFORMATION ………………………………………………………………………………………………………………………………02
MAIN COMPONENTS……………………………………………………………………………………………………………………………………..03
ENGINES………………………………………………………………………………………………………………………………………………………..04
SPECIFICATIONS …………………………………………………………………………………………………………………………………………..05
TRANSAXLE……………………………………………………………………………………………………………………………………………………06
FRONT AXLE ………………………………………………………………………………………………………………………………………………….07
HYDRAULIC SYSTEM……………………………………………………………………………………………………………………………………..08
ELECTRICAL SYSTEM……………………………………………………………………………………………………………………………………09
MOWER DECK ……………………………………………………………………………………………………………………………………………….10
INDEX …………………………………………………………………………………………………………………………………………………………….11

Changing Engine Oil

The engine oil drain  is located on the bottom of the engine oil pan, which is accessible from the left side of the Zero Turn Mower.
Place a tray or drip pan under the oil drain to receive drained oil.
The engine must be warmed up for 10 minutes or so ahead of time to heat the oil to lower its viscosity for compete drainage.
Remove the drain plug allowing the used oil drain out completely.
When the used oil has drained out completely, screw the drain plug back in securely.

Remove the oil filler cap from top of the cylinder head cover and pour in fresh engine oil through the oil filler.
NOTE: Engine oil capacity, 4.5 liters (0.99 gal).
Be sure to use oil recommended by your Dealer.
After engine oil replacement, start the engine and let it idle for a while.
Then stop it and wait for a while until the engine oil comes down into the oil pan. Now check the oil level to check to see if it is at the upper limit or not. When the level is low, replenish until the level reaches the upper limit.

IMPORTANT: Never fill over the upper limit, or it may cause engine trouble.
Make sure that there is no oil leakage through the drain plug and oil filter.

IMPORTANT: Never mix two different types of oil.
Use the proper SAE engine oil according to ambient temperatures.